A digital HART positioner with state-of-the-art piezo technology to provide superior performance and reliability. Easily configured using local buttons, HART handheld or ValveSight software.
SPECIFICATIONS
Air Cap: 20.4 Nm3/h @ 4 bar
(12 SCFM @ 60 psi)
Air Con: 0.5 Nm3/h @ 4 bar
(<0.3 SCFM @ 60 psi)
Repeatability: <0.05%
Temp: -40°C to 80°C (-40°F to 176°F)
Refer to LGENBR3000 or LGENIM0059
at flowserve.com/library.
• Installation ease assured by automatic calibration and tuning
• Faster diagnostic feedback and summaries made possible by burst mode
• Greater process control with 4-20 mA position feedback card option
The Flowserve Logix 3200MD digital positioner is a two-wire, 4-20 mA input digital valve positioner. It can be configured via the local user interface. The Logix 3200MD utilizes the HART protocol, enabling bidirectional remote communication through this positioner. The Logix 3200MD positioner can be installed on linear or rotary stroke double-acting and single-acting actuators. It is entirely powered by the 4-20 mA input signal. The startup current must be at least 3.6 mA (without an analog output card) or 3.85 mA (with an analog output card).
